Pickup, feed, and separation (rollers and pads)
TIP: For clarity, some figures in this chapter show assemblies removed that are not required to be
removed to service the product (for example, the scanner and document feeder assemblies). The
procedures in this manual are correct for your product.
Tray 1 (multipurpose tray) pickup roller
CAUTION: Do not touch the roller surface unless you are replacing the roller. Skin oils on the roller
can cause paper pickup problems.
1. Open Tray 1 (callout 1), and then remove the pickup roller cover (callout 2).
Figure 1-33 Remove the Tray 1 pickup roller (1 of 2)
1 2
22 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...