Tray 1 separation pad
CAUTION: Do not touch the pad surface unless you are replacing the pad. Skin oils on the pad can
cause paper pickup problems.
1. Open Tray 1 (callout 1), and then remove the pickup roller cover (callout 2).
Figure 1-35 Remove the Tray 1 separation pad (1 of 4)
1 2
2. Take out the replacement separation pad (callout 1) and the supplied install/removal tool (callout
2).
Figure 1-36 Remove the Tray 1 separation pad (2 of 4)
1
2
24 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...