Tray 2 separation roller
CAUTION: Do not touch the roller surface unless you are replacing the roller. Skin oils on the roller
can cause paper pickup problems.
1. Remove Tray 2 from the product.
2. Open the right-door.
3. On the separation roller assembly, slide the lever (callout 1) toward the unlocked icon (callout 2)
until it clicks into the unlocked position.
Figure 1-40 Remove the separation Tray 2 roller (1 of 2)
1
2
ENWW
Pickup, feed, and separation (rollers and pads)
27
To Next Page
Loading...