Right door
Before proceeding remove the following assemblies:
●
Rear cover. See
Rear cover on page 56.
●
Right rear cover. See
Right rear cover on page 57.
Remove the right door
1. Remove one screw (callout 1), release the link arm (callout 2), and then disconnect two connectors
(callout 3).
NOTE: The link arm is spring loaded and retracts into the product.
Figure 1-89 Remove the right door assembly (1 of 7)
2
1
3
60 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...