HP LaserJet Enterprise M806 - Page 119

●
HP Stapler/Stacker with 2/4 Hole Puncher — Mailbox Mode — A2W82A
●
HP Stapler/Stacker with 2/4 Hole Puncher — Stacker Mode — A2W82A
●
HP Booklet Maker/Finisher with 2/4 Hole Puncher — Mailbox Mode — CZ999A
●
HP Booklet Maker/Finisher with 2/4 Hole Puncher — Stacker Mode — CZ999A
Table 4-5 Four hole punch options by paper size – Long edge tray feed orientation
Paper size Image orientation Four Hole Punch Left
or Top
Four Hole Punch Left Four Hole Punch
Right
Four Hole Punch Top
Letter
216 x 279 mm (8.5 x
11 in)
A4
210 x 297 mm (8.3 x
11.7 in)
Portrait
Aa
123
Aa
123
Aa
123
Not supported
Landscape
Aa
123
Not supported Not supported
Aa
123
Table 4-6 Four hole punch options by paper size – Short edge tray feed orientation
Paper size Image orientation Four Hole Punch Left
or Top
Four Hole Punch Left Four Hole Punch
Right
Four Hole Punch Top
Ledger
279 x 432 mm (11 x
17 in)
A3
279 x 420 mm (11.7 x
16.5 in)
Portrait
Aa
123
Not supported Not supported
Aa
123
Landscape
Aa
123
Aa
123
Aa
123
Not supported
NOTE: Letter and A4 paper sizes are not supported in short edge feed.
Hole punch and staple output options
2 Hole punch and 1 staple
The following hole punch and staple option tables by paper size for the HP LaserJet Enterprise M806 and HP
LaserJet Enterprise flow MFP M830 applies to these devices:
●
HP Stapler/Stacker with 2/3 Hole Puncher — Mailbox Mode — CZ995A
●
HP Stapler/Stacker with 2/3 Hole Puncher — Stacker Mode — CZ995A
ENWW Device output options 111