HP LaserJet Enterprise M806 - Staple;Collate Introduction and Output Options

●
HP Stapler/Stacker with 2/3 Hole Puncher — Mailbox Mode — CZ995A
●
HP Stapler/Stacker with 2/3 Hole Puncher — Stacker Mode — CZ995A
The following hole punch and staple option tables by paper size for the HP Color LaserJet Enterprise M855
and HP Color LaserJet Enterprise flow MFP M880 applies to these devices:
●
HP Booklet Maker/Finisher with 2/3 Hole Puncher — Mailbox Mode — A2W84A
●
HP Booklet Maker/Finisher with 2/3 Hole Puncher — Stacker Mode — A2W84A
Table 4-13 Three hole punch and two staple options by paper size – Long edge tray feed orientation
Paper size Image orientation Two Staples Left or
Top, Three Hole
Punch Left or Top
Two Staples Left,
Three Hole Punch
Left
Two Staples Right,
Three Hole Right
Two Staples Top,
Three Hole Top
Letter
216 x 279 mm (8.5 x
11 in)
A4
210 x 297 mm (8.3 x
11.7 in)
Portrait
Aa
123
Aa
123
Aa
123
Not supported
Landscape
Aa
123
Not supported Not supported
Aa
123
Table 4-14 Three hole punch and two staple options by paper size – Short edge tray feed orientation
Paper size Image orientation Two Staples Left or
Top, Three Hole
Punch Left or Top
Two Staples Left,
Three Hole Punch
Left
Two Staples Right,
Three Hole Right
Two Staples Top,
Three Hole Punch Top
Ledger
279 x 432 mm (11 x
17 in)
A3
279 x 420 mm (11.7 x
16.5 in)
Portrait
Aa
123
Not supported Not supported
Aa
123
Landscape
Aa
123
Aa
123
Aa
123
Not supported
NOTE: Letter and A4 paper sizes are not supported in short edge feed.
4 Hole punch and 1 staple
The following hole punch and staple option tables by paper size for the HP LaserJet Enterprise M806 and HP
LaserJet Enterprise flow MFP M830 applies to these devices:
●
HP Stapler/Stacker with 2/4 Hole Puncher — Mailbox Mode — A2W82A
●
HP Stapler/Stacker with 2/4 Hole Puncher — Stacker Mode — A2W82A
116 Chapter 4 How to use the hole punch (optional finishing accessory) ENWW