Staple/collate when printing from a Windows® application
(optional accessory) using an HP UPD print driver or HP PCL 6
product specific print driver
1. In the application, select File and then Print.
2. Click Printer Properties or Printer Preferences depending on the application the job is printing from.
3. In the Document Properties dialog box, click the Output tab, and from the Staple drop-down menu,
select the position and number of staples. The following staple options are available:
●
None
●
One staple left
●
One staple right
●
Two staples left or top
●
Two staples left
●
Two staples right
●
Two staples top
4. Click OK and then Print.
140 Chapter 5 How to use the staple/collate feature (optional finishing accessory) ENWW
To Next Page
Loading...