HP LaserJet Enterprise M806 - Page 17

Sound power level
Printing (56 ppm)
Ready
Declared per ISO 9296
L
WAd
= 7.2 Bels (A) [72 dB(A)]
L
WAd
= 5.4 Bels (A) [54 dB(A)]
Sound pressure level - Bystander position
Printing (56 ppm)
Ready
Declared per ISO 9296
L
pAm
= 55 dB(A)
L
pAm
= 37 dB(A)
1
Acoustic values are subject to change. Configuration tested: HP LaserJet Enterprise M806x+, printing on A4-size paper at 56 ppm in
simplex mode.
Operating-environment range
Table 1-5 Operating-environment range
Environment Recommended Allowed
Temperature 17° to 25°C (59° to 99°F) 15° to 35°C (59° to 99°F)
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Altitude Not applicable 0 to 3048 m (0 to 10,000 ft)
HP LaserJet Enterprise flow MFP M830 product specifications
●
Technical specifications
●
Product dimensions
●
Power consumption, electrical specifications, and acoustic emissions
●
Operating-environment range
Technical specifications
M830z with
Stapler/stacker
accessory
M830z with
Stapler/stacker
with hole punch
accessory
M830z with Booklet
maker accessory
Paper handling Tray 1 (100-sheet capacity)
Tray 2 and Tray 3 (500-sheet capacity each)
Tray 4 and Tray 5 (combined 3,500-sheet
capacity)
Two-bin stapler/stacker
Two-bin stapler/stacker with hole punch
Booklet maker
Automatic duplex printing
Connectivity 10/100/1000 Ethernet LAN connection with
IPv4 and IPv6
ENWW HP LaserJet Enterprise M806 and HP LaserJet Enterprise flow MFP M830 9