Table 1-22 Specifications for booklet making (Booklet maker only) (continued)
Item Specifications
Folding capacity Without binding: 1 sheet
With binding: 2 to 15 sheets
Stapling position 2 points (center distribution; fixed interval)
Staple
accommodation
2000 staples
Staple supply Special cartridge
Staples Special staple
Staple detection Provided
Manual stapling Not provided
Folding method Roller contact
Folding mode Double folding
Folding position Paper center
Position adjustment Provided
Power supply From stacker unit (24VDC)
Paper Size L1 L2 L3
A3 88.5 mm 208.5 mm 210.0 mm
B4 68.5 mm 188.5 mm 182.0 mm
A4R 45.0 mm 165.0 mm 148.5 mm
LDR 79.7 mm 199.7 mm 216.0 mm
LGL 48.0 mm 168.0 mm 177.8 mm
LT R - R 48.0 mm 168.0 mm 139.7 mm
L3 –/+ 1 mm
L2 –/+ 2 mm
L1 –/+ 2 mm
Stapler/stacker output-bin capacities
The stapler/stacker has been designed to accept only 50 staple jobs for large paper and small paper staple
jobs. For large paper staple jobs, the maximum number of pages is 30 pages. For small paper staple jobs, the
ENWW Finishing accessory specifications 37
To Next Page
Loading...