2. Click Apply.
4: Configure the Booklet feature
1. Find the Booklet icon and click it to select the type of booklet to create.
2. To fold and staple the booklet, select the Fold and Stitch check box.
NOTE: Stapling is not an option by itself if Booklet is enabled under Booklet Format.
3. Select the appropriate booklet style and click Apply.
Step six: Configure the default hole punch location
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Stapler/Stacker Settings
●
Hole Punching
3. Select a hole punch location from the list of options, and then touch the Save button. The following hole
punch options are available for either a 2/3 Hole Puncher or 2/4 Hole Puncher:
Hole punch location 2/3 Hole Puncher 2/4 Hole Puncher
None
Two left or top
Two left
Two right
Two top
72 Chapter 2 Install and configure the finishing accessories ENWW
To Next Page
Loading...