●
The staple-edging sensor determines whether staples are pushed to the top of the staple
cartridge.
●
For safety, the stacker-controller circuit does not drive the staple motor (M41) unless the staple
safety switch (MS34) is turned on.
Figure 1-168 Stapling operation (1 of 2)
Figure 1-169 Stapling operation (2 of 2)
M41
Staple motor drive signal
Stapler HP detect signal
Hook top position detect signal
Hook empty detect signal
Stacker controller PCA
ENWW Booklet maker and booklet maker with hole punch 195
To Next Page
Loading...