Booklet maker with hole puncher assembly delivery modes
Table 1-70 Booklet maker with hole puncher assembly delivery modes
Feed Staple/Saddle Punch Offset Supported feature
Face-down N N N Yes
Face-down N N Y Yes
Face-down Staple N N Yes
Face-down Staple N Y No
Face-down Staple Y N Yes
Face-down Staple Y Y No
Face-down Saddle N N Yes
Face-down Saddle Y N No
Booklet maker jam detection
The saddle stitcher unit identifies a jam, and sends the jam signal to the product. When all doors are
closed after the jam is removed, the saddle stitcher unit checks whether the vertical-path paper
sensor (PI17) has detected the presence of paper. If the sensor has detected paper, the unit
identifies the condition as being a faulty jam removal and sends the jam signal to the product once
again.
Figure 1-185 Booklet maker jams
PI19
PI18
PI15
PI14
PI8
PI11
PI20
PI17
PI22
206 Chapter 1 Theory of operation ENWW
To Next Page
Loading...