Size mismatch in Tray <X> ............................................................. 640
Sleep mode on ............................................................................... 640
Staple Cartridge 2 and 3 very low (warning) .................................. 640
Staple Cartridge <X> low (warning) ................................................ 641
Staple Cartridge low ....................................................................... 641
Stapler/Stacker staple jam .............................................................. 641
Supplies low ................................................................................... 641
Supply Memory Warning ................................................................ 641
The unit has corrupt data ................................................................ 641
Too many pages in job to staple ..................................................... 642
Too many pages to make booklet .................................................. 642
Tray <X> [type] [size] ...................................................................... 642
Tray <X> empty: [Type], [Size] ....................................................... 642
Tray <X> lifting ............................................................................... 643
Tray <X> open ................................................................................ 643
Tray <X> overfilled ......................................................................... 644
Type mismatch Tray <X> ............................................................... 644
Unsupported drive installed To continue, touch “OK” ..................... 644
Unsupported supply in use OR Unsupported supply installed To
continue, touch “OK” ....................................................................... 645
Unsupported tray configuration ...................................................... 645
Unsupported USB accessory detected Remove USB
accessory ....................................................................................... 645
Upgrade Error ................................................................................. 645
Upper left bin full ............................................................................. 645
USB accessory not functional ......................................................... 646
USB hubs are not fully supported Some operations may not work
properly ........................................................................................... 646
USB is write protected To clear touch “OK” .................................... 646
USB needs too much power ........................................................... 646
USB needs too much power Remove USB and Then Turn Off
then On ........................................................................................... 646
USB not initialized .......................................................................... 647
USB storage accessory removed Clearing any associated data .... 647
USB storage device failure To clear touch “OK” ............................. 647
USB storage file operation failed To clear touch “OK” .................... 647
USB storage file system is full To clear touch “OK” ........................ 647
Used supply installed To continue, touch “OK” OR Used supply
in use Description ........................................................................... 648
Verifying, Please Wait .................................................................... 648
Waiting for Tray <X> to lift .............................................................. 648
Windows Login Required to Use this Feature ................................ 648
xxiv ENWW
To Next Page
Loading...