Clean the rollers in the stapler/stacker and stapler/stacker with hole punch
Locate the rollers in the stapler/stacker accessory.
●
Stack ejection rollers (callout 1)
●
Inlet roller (callout 2)
●
Inlet roller 1 (callout 3)
●
Registration roller 1 (callout 4)
Remove any visible lint or dust from each of the rollers using compressed air or a clean lint-free cloth
moistened with warm water.
3
4
1
2
726 Chapter 2 Solve problems ENWW
To Next Page
Loading...