HP LaserJet M1319f - Performance

Performance
Start fast and finish sooner
with technologies that help
improve productivity.
Performance is more than maximum engine speed, measured in pages per minute (ppm). Rather, performance
should be gauged by the speed at which the device can turn electronic files into printed pages or convert
printed material into electronic information. In addition to engine speed, several factors affect the time it takes to
print a job, including the use of special paper, computer download time, and device processing time. The time
it takes for your computer to download a job to the device, and for the device to process a job, depends on the
following variables:
• The complexity and size of graphics
• The product’s I/O configuration (network or USB speed)
• The speed of your computer
• The amount of device memory installed
A better performing product leads to higher productivity in your workplace. You spend less time waiting and
output appears more quickly. The HP LaserJet M1319f MFP is optimized for performance, print quality, and
affordability; it completes complex jobs quickly and without device failures.
Increase office efficiency
Instant-on Technology uses cutting-edge fuser technology that enables print jobs to begin quickly. The Time To
Completion (TTC) of a typical office print job can be more than two times faster on this device with Instant-on
Technology than on devices without it.
2
This means less waiting for prints and more time spent engaged in
business. Instant-on Technology also uses up to 50 percent less energy than traditional fusing.
With Instant-on Copy, the scanner on this HP LaserJet device uses an LED light source—an already-stable,
instant-on light source that requires no warm-up prior to scanning. After the copy is scanned, Instant-on
Technology takes over to print the copy output.
2
Instant-on Copy with LED-based technology requires 4 times less
energy when idle and 1.4 times less energy when copying versus traditional copying technology.
Quickly send and receive faxes with processing speeds of up to 33.6 kbps. Save frequently used numbers and
employ them at the touch of a button with fax speed dial. Use your MFP as a phone with the built-in handset.
FaxTel allows the device to monitor incoming calls, determine if a call is voice or fax, and ring to notify you of
voice calls.
10 Performance