Clean the paper path from the product control panel
1.
From the Home screen, touch the Setup
button.
2. Touch the Service menu.
3. Touch the Cleaning Page button.
4. Load plain letter or A4 paper when you are prompted.
5. Touch the OK button to begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
NOTE: For models that do not have an automatic duplexer, the product prints the first side and
then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the
same orientation.
ENWW
Clean the paper path from the product control panel
17
To Next Page
Loading...
