●
Auto Power Down
●
Power Down Delay
3. Select the time for the power-down delay.
NOTE: The default value is 30 minutes.
4. The product automatically wakes from the auto power-down mode when it receives jobs or when
you press a button on the control panel. You can change which events cause the product to
wake. Open the following menus:
●
System Setup
●
Energy Settings
●
Auto Power Down
●
Wake Events
To turn off a wake event, select the event and then select the No option.
Archive print
Archive print produces output that is less susceptible to toner smearing and dusting. Use archive print
to create documents that you want to preserve or archive.
1. At the control panel, press the OK button to open the menus.
2. Open the following menus:
●
Service
●
Archive Print
3. Select the On or Off option, and then press the OK button.
126 Chapter 10 Manage and maintain ENWW
To Next Page
Loading...
