Tray 1
●
Tray capacity and paper orientation
●
Load Tray 1
Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/
narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 2-2 Tray 1 capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 220 g/m
2
(58 lb)
Maximum stack height: 10 mm (0.39 in)
Equivalent to 100 sheets of 75 g/m
2
(20 lb)
Envelopes
Less than 60 g/m
2
(16 lb) to 90 g/m
2
(24 lb)
Up to 10 envelopes
Labels Maximum: 0.102 mm (0.004 in) thick Maximum stack height: 10 mm (0.39 in)
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 10 mm (0.39 in)
Up to 50 sheets
Glossy paper Range:
105 g/m
2
(28 lb) to 220 g/m
2
(58 lb)
Maximum stack height: 10 mm (0.39 in)
Up to 50 sheets
Table 2-3 Tray 1 paper orientation
Paper type Image orientation Duplex mode How to load paper
Preprinted or letterhead Portrait 1-sided printing Face-down
Top edge leading into the product
2-sided printing Face-up
Bottom edge leading into the product
18 Chapter 2 Paper trays ENWW
To Next Page
Loading...