List of figures
Figure 1-1 Phillips and pozidrive screwdriver comparison .................................................................................................. 3
Figure 1-2 Raise the front of the product .......................................................................................................................... 10
Figure 1-3 Remove the pickup roller .................................................................................................................................. 10
Figure 1-4 Remove the pickup roller (1 of 3) ..................................................................................................................... 11
Figure 1-5 Remove the separation roller (2 of 3) .............................................................................................................. 11
Figure 1-6 Remove the separation roller (3 of 3) .............................................................................................................. 12
Figure 1-7 Reinstall the separation roller .......................................................................................................................... 12
Figure 1-8 Open the jam-access cover ............................................................................................................................... 13
Figure 1-9 Remove the document feeder pickup roller assembly .................................................................................... 13
Figure 1-10 Remove the Tray 1 pickup roller (1 of 3) ........................................................................................................ 14
Figure 1-11 Raise the front of the product ........................................................................................................................ 15
Figure 1-12 Remove the Tray 1 pickup roller (3 of 3) ........................................................................................................ 15
Figure 1-13 Remove the Tray 1 separation pad ................................................................................................................ 16
Figure 1-14 Disconnect the ground cable, connector, and FFCs ....................................................................................... 17
Figure 1-15 Remove four screws ....................................................................................................................................... 17
Figure 1-16 Lift and slide the scanner assembly ............................................................................................................... 18
Figure 1-17 Lift the scanner up and off the product ......................................................................................................... 18
Figure 1-18 Turn the scanner assembly over .................................................................................................................... 19
Figure 1-19 Remove three screws, then remove the cable cover ..................................................................................... 20
Figure 1-20 Remove three screws, then remove the cable cover ..................................................................................... 20
Figure 1-21 Release the cables .......................................................................................................................................... 21
Figure 1-22 Remove the document feeder assembly ....................................................................................................... 21
Figure 1-23 Remove the print-cartridge drawer (1 of 3) ................................................................................................... 23
Figure 1-24 Remove the print-cartridge drawer (2 of 3) ................................................................................................... 23
Figure 1-25 Remove the print-cartridge drawer (3 of 3) ................................................................................................... 24
Figure 1-26 Remove the right cover (1 of 2) ...................................................................................................................... 25
Figure 1-27 Remove the right cover (2 of 2) ...................................................................................................................... 25
Figure 1-28 Remove the rear-upper cover (1 of 2) ............................................................................................................ 28
Figure 1-29 Remove the rear-upper cover (2 of 2) ............................................................................................................ 28
Figure 1-30 Remove the feed assembly (1 of 2) ................................................................................................................ 29
Figure 1-31 Remove the feed assembly (2 of 2) ................................................................................................................ 29
Figure 1-32 Close the duplex-feed assembly .................................................................................................................... 30
ENWW xi