HP LaserJet Pro 200 color MFP M276nw User Manual

LASERJET PRO 200
COLOR MFP M276
Clear jams in the paper input tray
CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused
by sharp objects is not covered by the warranty.
When removing jammed paper, pull it straight out from the product. Pulling jammed paper out of the product at
an angle can damage the product.
NOTE: Depending on where the jam is located, some of the following steps might not be necessary.
1. Pull out the tray, and lift the jam access door
above the tray.
2. With both hands, grasp the paper, and
carefully pull it free from the product.
© 2012 Copyright Hewlett-Packard Development
Company, L.P.
1

HP LaserJet Pro 200 color MFP M276nw Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 1200 dpi
Monthly Duty Cycle	Up to 30, 000 pages
Input Capacity	150-sheet input tray
Output Capacity	125-sheet output bin
Recommended Monthly Page Volume	250 to 1500 pages
Memory	256 MB
Faxing	Yes
Connectivity	Wireless 802.11b/g/n
Mobile Printing Capability	HP ePrint, Apple AirPrint
Copy Speed	Up to 14 cpm (black & color)
Duplex Printing	Manual
Dimensions	449 x 476 x 414 mm
Print Speed	Up to 14 ppm (black & color)
Display	3.5-in (8.89 cm) touchscreen CGD (color graphics display)

Summary

Clear jams in the paper input tray

Accessing the Jammed Area

Pull out the tray and lift the jam access door located above the tray.

Removing the Jammed Paper

Grasp the jammed paper with both hands and carefully pull it straight out.

Replacing the Tray and Resuming Print

Replace the Tray

Insert the paper tray back into the product.

Resume Printing

Press the OK button on the control panel to continue printing.