HP LaserJet Pro 200 color MFP M276nw Clean The Scanner Glass Manual

LASERJET PRO 200
COLOR MFP M276
Check the scanner glass for dirt and smudges
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect
performance. Use the following procedure to clean the scanner glass and white plastic backing.
1. Use the power switch to turn off the product,
and then unplug the power cord from the
electrical socket.
2. Open the scanner lid.
3. Clean the scanner glass and the white plastic
backing with a soft cloth or sponge that has
been moistened with nonabrasive glass
cleaner.
CAUTION: Do not use abrasives, acetone,
benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these
can damage the product. Do not place liquids
directly on the glass or platen. They might seep
and damage the product.
4. Dry the glass and white plastic with a chamois
or a cellulose sponge to prevent spotting.
5. Plug in the product, and then use the power
switch to turn on the product.
© 2012 Copyright Hewlett-Packard Development
Company, L.P.
1

HP LaserJet Pro 200 color MFP M276nw Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 1200 dpi
Monthly Duty Cycle	Up to 30, 000 pages
Input Capacity	150-sheet input tray
Output Capacity	125-sheet output bin
Recommended Monthly Page Volume	250 to 1500 pages
Memory	256 MB
Faxing	Yes
Connectivity	Wireless 802.11b/g/n
Mobile Printing Capability	HP ePrint, Apple AirPrint
Copy Speed	Up to 14 cpm (black & color)
Duplex Printing	Manual
Dimensions	449 x 476 x 414 mm
Print Speed	Up to 14 ppm (black & color)
Display	3.5-in (8.89 cm) touchscreen CGD (color graphics display)