HP LaserJet Pro CP1025 - Color Printer - Formatter PCA (base model)

Formatter PCA (base model)
CAUTION: ESD sensitive.
Before proceeding, remove the following components:
●
Left cover assembly. See
Left cover assembly on page 19.
Remove the formatter PCA (base model)
1. Disconnect three connectors (callout 1).
Figure 1-48 Remove the formatter PCA (base model; 1 of 2)
1
2. Remove three screws (callout 1), and then remove the formatter PCA.
Figure 1-49 Remove the formatter PCA (base model; 2 of 2)
1
ENWW
Removal and replacement procedures
43