Removal and replacement procedures
Remove the print cartridges
CAUTION: If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold
water. Hot water sets toner into the fabric.
1. Open the front door and pull out the print-cartridge drawer.
2. Grasp the handle on the print cartridge, and then pull the cartridge straight up to remove it.
Repeat this step for the remaining print cartridges.
CAUTION: Do not touch the imaging drum on the bottom of the print cartridge. Finger prints on
the imaging drum can cause print-quality problems.
Do not allow the image drum to contact any surface when the cartridges are set down. Protect
the image drum at all times. Dust and debris can stick to the drum and cause print-quality
problems.
Figure 1-3 Remove the print cartridge
3. Close the print-cartridge and front doors.
ENWW Removal and replacement procedures 5
To Next Page
Loading...