Intermediate transfer belt (ITB)
1. Remove the following components:
●
Right cover. See
Right cover on page 10.
●
Left cover. See
Left cover on page 13.
●
Rear-side cover. See
Rear-side cover on page 21.
2. Open the front door and pull out the print-cartridge drawer.
Figure 1-46 Remove the ITB (1 of 9)
3. Release one tab (callout 1).
Figure 1-47 Remove the ITB (2 of 9)
1
30 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...