Clean the product
Clean the pickup roller
If you want to clean the pickup roller before deciding to replace it, follow these instructions:
1. Turn off the product, unplug the power cord from the product, and then remove the pickup roller.
2. Dab a lint-free cloth in isopropyl alcohol, and then scrub the roller.
WARNING! Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before
you close the product and plug in the power cord, allow the alcohol to dry completely.
NOTE: In certain areas of California, air pollution control regulations restrict the use of liquid
isopropyl alcohol (IPA) as a cleaning agent. In those areas of California, please disregard the
previous recommendations and use a dry, lint free cloth, moistened with water, to clean the
pickup roller.
3. Use a dry, lint free cloth, to wipe the pickup roller and remove loose dirt.
4. Allow the pickup roller to dry completely before you reinstall it.
5. Plug the power cord into the product.
160 Chapter 2 Solve problems ENWW
To Next Page
Loading...
