Upper cover
Before proceeding, remove the following components:
●
Main tray. See
Main tray on page 10.
●
Output bin extension. See
Output bin extension on page 11.
●
Left cover. See
Left cover on page 12.
●
Right cover. See
Right cover on page 19.
●
Scanner assembly. See
Scanner assembly on page 15.
●
Cartridge door. See
Cartridge door on page 24.
●
Front cover. See
Front cover on page 27.
Remove the upper cover
▲
Remove four screws (callout 1), and then remove the upper cover (callout 2).
CAUTION: Do not lose the cartridge door arms while servicing the product. The cartridge door
connecting arms can easily come apart once the cartridge door is removed.
Figure 1-38 Remove the upper cover
1
2
28 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
