8. Remove six screws (callout 1), and then remove the pickup assembly (callout 2).
CAUTION: The ground spring on the assembly is not captive. Do not lose the spring when
removing the assembly. See
Reinstall the pickup assembly on page 41.
Figure 1-55 Remove the pickup assembly (8 of 9)
1
2
9. Remove one gear (callout 1) from the pickup assembly (callout 2).
CAUTION: The gear is not captive. Do not lose the gear while servicing the product.
Figure 1-56 Remove the pickup assembly (9 of 9)
1
2
40 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
