Pickup solenoid
Before proceeding, remove the following components:
●
Main tray. See
Main tray on page 10.
●
Output bin extension. See
Output bin extension on page 11.
●
Left cover. See
Left cover on page 12.
●
Scanner assembly. See
Scanner assembly on page 15.
●
Formatter PCA. See
Formatter PCA on page 29.
●
Fax modem. See
Fax PCA on page 31.
●
Right cover. See
Right cover on page 19.
●
Duplex frame. See
Duplex frame on page 23.
●
Cartridge door. See
Cartridge door on page 24.
●
Front cover. See
Front cover on page 27.
●
Upper cover. See
Upper cover on page 28.
Remove the pickup solenoid
1. Release two tabs (callout 1), and then remove the duplex reverse guide (callout 2).
Figure 1-83 Remove the pickup solenoid (1 of 6)
1
2
ENWW Removal and replacement procedures 55
To Next Page
Loading...
