Figure 2-20 Control panel 2ndary Service test access buttons
2
1
Table 2-8 Control panel 2ndary Service test access buttons
Item Description
1 Left arrow button
2 Cancel button
1. Make sure the product is in the Ready state.
2.
From the Home screen on the product control panel, touch the OK
button.
3. Press the left arrow button, and then quickly touch the Cancel button.
4. The product returns to the Ready state. Press the OK button to reopen the menus.
5. Select the 2ndary Service menu.
Secondary service menu structure
Table 2-9 Secondary Service menu
Menu item Sub-menu item Description
Default Settings Default service settings for the product.
Location A list of available locations
appears
This item sets certain product parameters that are dependent on the location,
such as the default paper size and the symbol set.
Scroll to the appropriate location and select the Yes option to set the location.
The product automatically restarts after you change the location.
Line Frequency This item allows the refresh rate of the control panel to be changed between
50 and 60 Hz.
LED Test This item allows the testing of the different LED Displays.
ENWW Service mode functions 91
To Next Page
Loading...