Left cover
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
Remove the left cover
1. On the rear of the product, remove one screw (callout 1).
Figure 1-17 Remove the left cover (1 of 2)
1
2. Rotate the product onto the right side. On the bottom of the product, release one tab (callout 1), and
remove the left cover.
Figure 1-18 Remove the left cover (2 of 2)
1
ENWW Removal and replacement procedures 13
To Next Page
Loading...
