HP LaserJet Pro MFP M125 - Page 55

panel FFC from the top of the formatter (callout 3), and unwind it from the cable guide (callout 4).
Remove one screw on the support bracket (callout 5), and remove the support bracket (callout 6).
Figure 1-61 Remove the formatter PCA for fax models (1 of 2)
1
2
3
4
6
5
2. Remove four screws (callout 1), and remove the formatter PCA (callout 2).
Figure 1-62 Remove the formatter PCA for fax models (2 of 2)
1
2
ENWW Removal and replacement procedures 39