Remove the formatter PCA for fax + wireless models (M127fw, M128fw)
1. Disconnect the black scanner FFC from the bottom of the formatter (callout 1). Disconnect the red and
black document-feeder connector at the top of the formatter (callout 2). Disconnect the white control-
panel FFC from the top of the formatter (callout 3), and unwind it from the cable guide (callout 4).
Figure 1-63 Remove the formatter PCA for fax + wireless models (1 of 4)
1
3
4
2
2. Remove two screws (callout 1), and remove the wireless PCA and holder (callout 2).
Figure 1-64 Remove the formatter PCA for fax + wireless models (2 of 4)
1
2
40 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
