HP LaserJet Pro MFP M125 - Page 58

Fax PCA (fax models only)
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
●
Left cover. See
Left cover on page 13.
Remove the fax PCA
1. Disconnect one connector (callout 1), and remove four screws (callout 2).
Figure 1-67 Remove the fax PCA (1 of 2)
2
1
2. Pull down the rubber cap on the bottom fax port (callout 1). Remove the fax PCA (callout 2).
Figure 1-68 Remove the fax PCA (2 of 2)
1
2
42 Chapter 1 Removal and replacement ENWW