Laser scanner assembly and cable
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
●
Left cover. See
Left cover on page 13.
●
Scanner assembly. See
Scanner assembly on page 14.
●
Cartridge door. See
Cartridge door on page 17.
●
Front cover. See
Front cover and control-panel assembly on page 19.
●
Right cover. See
Right cover on page 24.
●
Top cover. See
Top cover and image scanner lock on page 27.
●
Formatter PCA. See
Formatter PCA on page 37.
Remove the laser scanner assembly and cable
1. Remove four screws (callout 1), and lift the laser scanner cover (callout 2) up to remove it.
Figure 1-69 Remove the laser scanner assembly and cable (1 of 2)
1
2
ENWW Removal and replacement procedures 43
To Next Page
Loading...
