HP LaserJet Pro P1100 series - HPs Premium Protection Warranty: LaserJet print cartridge limited warranty statement

Optimize and improve image quality
Change print density
You can change the print density setting by from the printer properties dialog box.
1. Windows XP, Windows Server 2008, and Windows Server 2003 (using the
default Start menu view): Click Start, and then click Printers and Faxes.
-or-
Windows XP, Windows Server 2008, and Windows Server 2003 (using the
Classic Start menu view): Click Start, and then click Printers.
-or-
Windows Vista: Click Start, click Control Panel, and then in the category for Hardware
and Sound click Printer.
2. In the list of printers, right-click the name of this product, and then click the Properties menu item
to open the printer properties dialog box.
3. Click the Device settings tab, and then move the Print Density slider to the desired setting.
4. Click the Apply button to accept the setting, and then click the OK button to close the dialog
box.
98 Chapter 8 Solve problems ENWW