Right cover
Before proceeding, remove the following components:
●
Input tray or main-input tray. See
Input tray or main-input tray on page 40.
●
Output bin tray extension. See
Output bin tray extension on page 41.
●
Front cover. See
Front cover on page 42.
Remove the right cover
1. Use the figure below to locate the tabs (callout 1) on the cover.
Figure 2-15 Remove the right cover (1 of 3)
1
2. Remove on screw (callout 1), and open the print-cartridge door.
Figure 2-16 Remove the right cover (2 of 3)
1
46 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...