Cartridge door
Before proceeding, remove the following components:
●
Input tray or main-input tray. See
Input tray or main-input tray on page 40.
●
Output bin tray extension. See
Output bin tray extension on page 41.
●
Front cover. See
Front cover on page 42.
●
Left cover. See
Left cover on page 43.
●
Right cover. See
Right cover on page 46.
Remove the cartridge door
1. Open the cartridge door, and then release the tabs on the link arms (callout 1).
Figure 2-18 Remove the cartridge door (1 of 2)
1
48 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...