HP LaserJet Pro P1600 - Page 117

4. Disconnect one connector (callout 1), and then release the wire harness (callout 2) from the guides
(callout 3).
Figure 2-98 Remove the engine controller PCA (4 of 9)
1
2
3
5. Disconnect four connectors (callout 1), and then remove the wire harnesses (callout 2) from the
guide (callout 3).
Figure 2-99 Remove the engine controller PCA (5 of 9)
2
3
1
ENWW Main assemblies 99