Right cover, simplex product
Before proceeding, remove the following components:
●
Main-input tray. See
Main-input tray on page 43.
●
Output bin tray extension. See
Output bin tray extension on page 44.
Remove the right cover, simplex product
1. Remove one screw (callout 1).
Figure 2-18 Remove the right cover, simplex product (1 of 4)
1
2. Release one tab (callout 1) at the bottom edge of the cover.
Figure 2-19 Remove the right cover, simplex product (2 of 4)
1
50 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...