HP LaserJet - Page 80

SECONDARY FONT DEFAULT - Ec)#@
This escape sequence performs different functions depending on
what value is placed in the value field (#):
# Value, Function
o Selects the default symbol set as the symbol set for the
secondary font in the current orientation.
Sets the
secondary symbol set to that of the default
primary font in the current orientation.
2 Sets the secondary symbol set to that of the current
primary symbol set in the current orientation.
3 Selects
the default secondary font in the current
orientation and sets all the secondary font
characteristics to those of the selected font. (NOTE:
If the font is proportionally spaced, the pitch
parameter is not changed.
CREATE FONT (FONT DESCRIPTOR) - Ec)s#W[font
descriptor]
This escape sequence
is used to create the font descriptor (font
header) for the specified font ID. The value field (#) specifies the
number of bytes in the font descriptor (this number can be larger
than 26). (NOTE: The brackets surrounding "font descriptor" in
the escape sequence are used for clarity-the brackets are not
actually part of the escape sequence.) If a font with the same
font ID number already exists, the previous font will be deleted
when a valid create font escape sequence is received. If there is
not enough memory to create the font, the font is not created-
but an existing font with the same font ID is deleted. The format
for the font descriptor is described on the next page.
3-9