HP Latex 1500 - Advanced Error Codes and Specifications; Numerical Error Codes and Specs

Introductory Information
6
English
Message or code Recommendation
Replace {color} cartridge Replace the cartridge.
Replace {color} printhead Replace the printhead.
Replace aerosol lter Replace both aerosol lters.
Reseat {color} cartridge Reseat the cartridge.
Reseat {color} printhead Reseat the printhead.
Select substrate name in the IPS Select the name of the loaded substrate in the Internal Print Server.
Starting The printer is being detected while starting up.
Substrate jam: remove substrate Remove all substrate from the printer (see the user’s guide).
Substrate may be detached from the
rear spindle or slippage detected.
Substrate will be unloaded.
See the user’s guide.
System error The printer has a system error. In the alert window, you should see the
numerical code of the system error.
Very low cleaner roll Be ready to replace the printhead cleaning roll very soon.
10.04.XX:YY Problem with e-cabinet fuses. You may need to run a subsystem diagnostic to
conrm that fuse replacement is required.
10.06.09:40 The emergency stops and/or safety relay have been activated. Check that the
emergency stops are not activated. If the problem persists, run a diagnostic to
identify the issue.
51.01.00:92 The main window is open. Close the window to continue printing. If the problem
persists, run a diagnostic to identify the issue.
51.02.00:92 The front cover is open. Close the front cover to continue printing. If the
problem persists, run a diagnostic to identify the issue.
51.03.00:92 The loading table is not closed. Close the loading table to continue printing. If
the problem persists, run a diagnostic to identify the issue.
51.04.00:92 The emergency stops and/or safety relay have been activated. Check that the
emergency stops are not activated. If the problem persists, run a diagnostic to
identify the issue.
86.01.00:01 Carriage movement failure. Ensure that maintenance routines are up to date,
then perform Reinitialize Carriage from the Internal Print Server. Also perform
the carriage-rail cleaning process.
The above table includes the most signicant numerical codes. If you receive an error code that is not in the table, follow
the instructions in the message.
HP Latex 1500 Printer (Under RMN: BCLAA-1606)
Specication
Power 10kW
Frequency 50 / 60 Hz
3∅ ~AC Voltage 200 - 240 / 380 - 415 V
Current Max 48 A / 30 A