HP LaserJet M1319 MFP Series – Copy
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
1
www.hp.com
Reduce or enlarge the image
How do I? Steps to perform
Reduce or enlarge copies for the current job
1 On the product control panel, press Reduce/Enlarge.
NOTE: If you select Custom: 25 to 400%, type a percentage
by using the alphanumeric buttons.
If you select 2 pages per sheet or 4 pages per sheet, select
the orientation (portrait or landscape).
2 Select the size to which you would like to reduce or
enlarge the copies in this job.
3 Press Start Copy to save the selection and immediately
start the copy job, or press OK to save the selection
without starting the job.
Adjust the default copy size
1 Press Setup.
NOTE: The product can reduce copies to as little as 25% of
the original size or enlarge copies to as much as 400% of the
original size.
2 Use the arrow buttons to select Copy setup, and then
press OK.
Copy setup
To Next Page
Loading...