HP LaserJet Pro MFP M129-M132

To Next Page

Dansk ............. 19

Català ............. 16

Español ........... 13

Italiano ........... 10

Deutsch ............. 7

Français ............ 4

English .............. 1

Norsk .............. 37

Lietuvių .......... 34

Latviešu .......... 31

Suomi ............. 28

Eesti ............... 25

Nederlands ...... 22

Svenska .......... 43

Português ....... 40

Windows

1. For Windows 7 or lower, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During Windows software installation, select the option to connect

through a network.

Mac

1. For Mac, connect the USB cable between the computer and the printer

before installing the software.

2. Continue to “6. Locate or download the software installation les.”

Wireless network connection

(wireless models only)

Touchscreen control panels

1. To connect the printer to a wireless (Wi-Fi) network, on the printer control

panel, touch the Wireless button.

2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select the

network name from the SSID list, or enter the network name if it is not

listed.

3. Use the keyboard to enter the passphrase, and then touch the OK button.

4. Wait while the printer establishes a network connection.

5. On the printer control panel, touch the Network button. If an IP address

is listed, the network connection has been established. If not, wait a few

more minutes and try again. Note the IP address for use during software

installation. Example IP address: 192.168.0.1

6. To print from a computer, continue with “6. Locate or download the

software installation les.” To print from a phone or tablet only,

continue with “8. Mobile and wireless printing (optional).”

2-line control panels

1. To connect the printer to a wireless (Wi-Fi) network, make sure that the

printer, access point, and computer are turned on and that the computer

is connected to the wireless network.

2. A USB cable will be required.

3. Disconnect any USB or Ethernet cable that is connected to the printer.

4. To print from a computer, continue with “6. Locate or download the

software installation les.” To print from a phone or tablet only,

continue with “8. Mobile and wireless printing (optional).”

NOTE: During software installation, select the option to Help me set up a

rst-time wireless connection.

Wired (Ethernet) network connection

(optional)

Use a standard network cable.

1. Connect the network cable to the printer and to the network. Wait a few

minutes for the printer to acquire a network address.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Connect through

a network.

www.hp.com/support/ljM129MFP www.register.hp.com

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

IMPORTANT:

Steps 1 - 3 on

the printer hardware setup

poster, then continue

with Step 4.

Select a connection method

Set up the control panel

At the printer control panel, check the display status before beginning software installation.

Manually congure the IP address

See the printer user guide for information on how to manually congure the IP

address www.hp.com/support/ljM129MFP.

LaserJet Pro MFP M129-M132,

LaserJet Ultra MFP M133-M134

Getting Started Guide

Need help?

Do you have a question about the HP LaserJet Pro MFP M129-M132 and is the answer not in the manual?

HP LaserJet Pro MFP M129-M132 Specifications

General

Print Technology	Laser
Functionality	Print, Copy, Scan
Print Speed (Black)	Up to 22 ppm
Print Resolution	600 x 600 dpi
Processor Speed	600 MHz
Display	2-Line LCD
Memory	128 MB
Duplex Printing	Manual
Copy Speed (Black)	Up to 22 cpm
Copy Resolution (Black Text)	600 x 600 dpi
Resolution Technology	HP FastRes 1200
Standard Paper Capacity	150 sheets
Maximum Paper Size	A4
Connectivity	USB, Ethernet
Mobile Printing	Apple AirPrint
Operating System Compatibility	Windows, macOS, Linux
Scan Resolution (Hardware)	1200 x 1200 dpi
Toner Yield	1, 500 pages
Recommended Monthly Page Volume	250 to 2, 000 pages