HP M1319

HP LaserJet M1319 MFP Series – Copy
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
1
www.hp.com
Copy using the automatic document feeder (ADF)
How do I? Steps to perform
1 Insert the top-end of the stack of originals into the ADF
input tray, with the media stack face-down and the first
page to be copied at the bottom of the stack.
Load originals using the automatic
document feeder (ADF)
2 Make sure that the ADF media lever is set correctly for
single-page or multiple-page documents.
CAUTION: To prevent damage to the product, do not use
an original that contains correction tape, correction fluid,
paper clips, or staples. Also, do not load photographs,
small originals, or fragile originals into the ADF.
3 Slide the stack into the ADF until it does not move any
farther.
Document loaded appears on the control-panel
display.
4 Adjust the media guides until they are snug against
the media.
Document loaded

HP M1319 Specifications

General

Functions	Print, copy, scan
Print Technology	Laser
Scanner Type	Flatbed
Optical Resolution	Up to 1200 dpi
Memory	8 MB
Print Resolution	Up to 600 x 600 dpi
First Page Out	As fast as 8.5 sec
Duplex Printing	Manual
Copy Resolution	Up to 600 x 400 dpi
Maximum Number of Copies	Up to 99 copies
Input Capacity	Up to 150 sheets
Output Capacity	Up to 100 sheets
Media Sizes Supported	A4, A5, B5, Letter, Legal, Executive, Envelopes (DL, C5), Postcards, Custom (76 x 127 mm to 216 x 356 mm)
Media Types Supported	Paper (laser, plain, photo, rough, vellum), envelopes, labels, cardstock, transparencies, postcards
Media Weight	60-163 g/m²
Interface	USB 2.0
Operating System Compatibility	Windows, Mac OS, Linux
Product Type	Multifunction laser printer

Summary

Copy Using the Automatic Document Feeder (ADF)

Load Originals Using the Automatic Document Feeder (ADF)

Instructions for loading originals into the automatic document feeder for copying.

Collate My Copy Job

Change the Copy-Collation Setting for the Current Job

Guide to modifying the collation settings for a copy job.

Copy on Both Sides (Duplex)

Copy a Two-Sided Original to a One-Sided Document

Steps to copy a duplex original into a simplex document.

Copy a Two-Sided Original to a Two-Sided Document

Instructions for copying a duplex original to a duplex document.

Copy on Preprinted Letterhead or Forms

Change the Default Media-Size Setting

Procedure to modify the default paper size setting for copies.

Change the Default Media-Type Setting

Procedure to modify the default media type setting for copies.

Make My Copy Look Better

Adjust the Copy Quality for the Current Job

Steps to adjust the copy quality settings for the current job.

Reduce or Enlarge the Image

Reduce or Enlarge Copies for the Current Job

Instructions to reduce or enlarge copies for the current job using the control panel.

Adjust the Default Copy Size

Procedure to set the default reduction or enlargement size for copies.

Copy on Media of Different Sizes and Types

Media Sizes and Types

Overview of available media sizes and types for copying.