HP M1319 - Collate My Copy Job; Change the Copy-Collation Setting for the Current Job

HP LaserJet M1319 MFP Series – Copy
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
1
www.hp.com
Collate my copy job
How do I? Steps to perform
Change the copy-collation setting for the
current job
1 Press Set-up then select Copy setup.
2 Use the arrow buttons to select Def Collation.
3 Select the number of copies.
4 Press Start Copy to save the selection and
immediately start the copy job.
-or-
5 Press OK to save the selection without starting the
job.
Def Collation
Copy setup
10