Print server connection
Perform the following when the product is connected via the network using a print server:
1. If the product is connected via the network using a print server, select the A network printer, or
a printer attached to another computer option, and then click the Next > button.
NOTE: If the product is connected to the computer using a USB cable, or is connected via the
network without using a print server, select the Local printer attached to this computer option,
and then click the Next > button. You can also select the Automatically detect and install my
Plug and Play printer check box prior to clicking the Next > button to have the computer
automatically install the print driver. For detailed installation instructions, see either
Use an existing
port for a direct connection on page 63 or see Create a new TCP/IP port for a direct connection
on page 68.
Figure 3-13 Add Printer Wizard — Local or Network Printer screen
ENWW Microsoft Windows general installation overview 71
To Next Page
Loading...