Fuser
1. Remove the following assemblies:
●
Scanner assembly. See
Scanner assembly on page 90.
●
Right and left covers. See
Side covers on page 104.
●
Print-cartridge door. See
Print-cartridge door on page 106.
●
Rear cover and fuser cover. See
Rear cover and fuser cover on page 107.
●
Front cover. See
Front cover on page 109.
●
Formatter and fax card. See
Formatter and fax card on page 113.
●
Scanner support-frame and chassis reinforcement plate. See
Scanner support-frame
on page 118.
2. Remove six screws (callout 1) and the power supply sheet-metal plate (callout 2).
Figure 5-92 Remove the fuser (1 of 6)
2
1
2
128 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...