HP M1522nf - LaserJet MFP B/W Laser

To Next Page

To Previous Page

Control panel message Description Recommended action

Engine comm. error The product experienced a print engine

communication error.

This is a warning message only. Job output

might be affected.

Engine error, press OK The product experienced a print engine error. This is a warning message only. Job output

might be affected.

Fax delayed – Send memory full (fax

models only)

Fax memory is full. Cancel the fax by pressing OK or Cancel.

Resend the fax. You might need to send the

fax in multiple sections if the error occurs

again.

Fax is busy Canceled send (fax models

only)

The fax line to which you were sending a fax

was busy. The product has canceled sending

the fax.

Call the recipient to ensure that the fax

machine is on and ready.

Check that you are dialing the correct fax

number.

Check that the Redial if busy option is

enabled.

Check for a dial tone on the phone line by

pressing Start Fax.

Make sure that the phone is working by

disconnecting the product, plugging in a

telephone to the phone line, and making a

voice call.

Plug the product phone cord into a jack for

another phone line, and then try sending the

fax again.

Try a different phone cord.

If the error persists, contact HP. See

www.hp.com/support/ljm1522 or the support

flyer that came in the product box.

Fax is busy Redial pending (fax models

only)

The fax line to which you were sending a fax

was busy. The product automatically redials

the busy number. See the product user guide.

Allow the product to retry sending the fax.