Control panel message Description Recommended action
If the error persists, contact HP. See
www.hp.com/support/ljm1522 or the support
flyer that came in the product box.
Scanner error #, Turn off then on The product has experienced an error in the
scanner sub-assembly area.
Turn off the power by using the power switch,
wait at least 30 seconds, and then turn on the
power and wait for the product to initialize.
If a surge protector is being used, remove it.
Plug the product directly into the wall socket.
Use the power switch to turn the product on.
If the error persists, contact HP. See
www.hp.com/support/ljm1522 or the support
flyer that came in the product box.
Table 6-2 Critical error messages (continued)
148 Chapter 6 Problem solve ENWW
To Next Page
Loading...