NOTE: You do not have to have Internet access to open and use Macintosh Configure Device.
View Macintosh Configure Device when the product is connected to the computer
1. Open HP Director by clicking the HP Director icon in the dock.
2. In HP Director, click Settings.
3. Select Configure Device to open the Macintosh Configure Device home page in a browser.
View Macintosh Configure Device when the product is connected to the network
1. Open one of the following browsers:
●
Internet Explorer 5.0 or later
●
Netscape Navigator 4.75 or later
●
Opera 6.05 or later
●
Safari 1.2 or later
2. Type the IP address of the product into the Web browser to open the Macintosh Configure Device
home page.
PDEs (Mac OS X v10.3, v10.4, and later)
PDEs are code plug-ins that provide access to product features, such as information about the number
of copies, two-sided printing, and quality settings. An installation program for the PDEs and other
software is provided on the product CD for Macintosh.
Uninstall software
Windows
Use the Add or Remove Programs method in Windows to remove the product software. This method
does not require you to have the software CD.
1. Click Start, point to Settings, and then click Control Panel.
NOTE: In Windows XP, click Start, and then click Control panel.
2. Double-click Add or Remove Programs.
3. Scroll through the list of software programs and click HP LaserJet M2727.
4. Click Remove.
Macintosh
To remove the software, drag the PPD files to the trash can.
ENWW Uninstall software 11
To Next Page
Loading...